A-Level Science Required Practicals: Checklist and Exam-Question Guide
A-LevelBiologyChemistryPhysicsRequired PracticalsRevision SystemsExam Technique

A-Level Science Required Practicals: Checklist and Exam-Question Guide

TThe Tutors UK Editorial Team
2026-11-13
8 min read

Track A-Level Biology, Chemistry and Physics practical skills with subject checklists, data tips, exam prompts and a practical revision schedule.

A-Level science practicals are tested through both hands-on work and written questions. This guide gives you a reusable checklist for Biology, Chemistry and Physics, shows what to record after each practical, and explains how to turn practical experience into exam-ready answers. Because required practical lists and wording vary by exam board, use this article alongside your current specification and your teacher’s practical schedule.

Overview

Required practical revision is not simply a matter of memorising the names of experiments. In an exam, you may need to select suitable apparatus, identify variables, explain a control, describe a safety precaution, process results or evaluate a method you have not seen before.

The most effective approach is to keep a practicals tracker. For every investigation, record:

  • the scientific aim and the principle being demonstrated;
  • the independent, dependent and control variables;
  • the apparatus and measuring equipment used;
  • the method, including important steps and measurement choices;
  • relevant hazards, risks and precautions;
  • the type of results collected and how they were processed;
  • limitations, improvements and possible sources of error; and
  • any exam questions or unfamiliar data connected with the practical.

This system helps you revisit weak areas instead of repeatedly rereading practical write-ups you already understand. It also makes it easier to spot recurring skills, such as calculating percentage uncertainty, drawing a line of best fit or explaining why repeats improve confidence in a result.

Before starting, identify your exam board and qualification specification. AQA, Pearson Edexcel, OCR and WJEC specifications may use different lists, terminology and assessment arrangements. The underlying skills overlap, but your board’s current specification should be the final check.

What to track

1. The practical purpose

Write the aim in one sentence, then add the scientific idea behind it. For example, a biology investigation might examine how a factor affects enzyme activity; a chemistry practical might measure a quantity through titration; a physics investigation might test a relationship between two variables. Knowing the purpose helps you explain why each method step is necessary.

2. Variables and controls

Label the independent variable, which you change, and the dependent variable, which you measure. List the control variables that must remain constant. Be precise: “temperature” is more useful than “conditions”, and “volume of solution” is more useful than “amount”.

Also record how the independent variable is changed. A strong exam answer may need a suitable range, evenly spaced values, or enough readings to reveal a pattern. If a control experiment or control group is appropriate, explain what it shows rather than merely naming it.

3. Apparatus and measurement

Track the equipment and the reason for choosing it. Ask yourself:

  • What is being measured?
  • What unit should be used?
  • What resolution or precision does the instrument provide?
  • Would another piece of apparatus reduce uncertainty?
  • Where could a reading be misjudged, such as at a meniscus or pointer?

Practise distinguishing precision from accuracy. Repeated readings can make a result more reliable, but they do not automatically remove a systematic error caused by a poorly calibrated instrument or an unsuitable method.

4. Method, safety and improvements

Reduce the method to the steps that affect validity. Include how measurements are taken, when readings are recorded and how repeats are handled. Avoid copying every instruction without understanding its purpose.

For safety, identify the hazard, the risk and the control measure. A useful answer explains how exposure is reduced, for example by wearing eye protection, using a fume cupboard, keeping a flame away from a flammable substance or disposing of biological material appropriately. Your teacher’s laboratory guidance always takes priority.

For each practical, write at least two realistic improvements. An improvement should address a named weakness: take more readings, use a narrower interval around an important result, control temperature with a water bath, use a data logger, shield a light sensor from surrounding light, or repeat an endpoint until concordant values are obtained. Do not suggest changes that would make the investigation unsafe or alter the variable being tested.

5. Results, graphs and calculations

Record the expected table structure, units and number of decimal places. Then practise the analysis that naturally follows the investigation:

  • mean, percentage change or rate;
  • percentage uncertainty or absolute uncertainty where required;
  • anomalies and whether there is a reason to investigate them;
  • graph axes with units, sensible scales and plotted points;
  • a line or curve of best fit where appropriate; and
  • the gradient, intercept or relationship between variables.

Keep one worked example in your tracker. It is easier to revise a calculation when you can see the values, units and substitution rather than a formula alone.

Subject-by-subject checklist

SubjectChecklist focusCommon question angles
BiologySampling, microscopy, biological molecules, enzymes, transport, ecology, aseptic technique and measuring rates.Why a control is needed; how to improve reliability; calculating magnification or rate; interpreting patterns; explaining contamination or validity.
ChemistryAccurate measurement, titration, preparation, observations, heating, separation, qualitative tests and monitoring change.Choosing apparatus; identifying an endpoint; recording colour or precipitate observations; calculating concentration or yield; explaining uncertainty and purification.
PhysicsElectrical measurements, mechanics, materials, waves, thermal methods and use of sensors or timing equipment.Setting up a circuit; reducing parallax; selecting a scale; calculating a gradient; explaining random and systematic errors; using a relationship to determine a quantity.

This table is a revision prompt, not a replacement for your required-practical list. Tick off each practical on your own board’s specification and add the exact apparatus and terminology used in lessons.

Cadence and checkpoints

Use three levels of review rather than leaving all practical revision until the final weeks.

After each practical

Spend 10 to 15 minutes completing the tracker while the method and observations are fresh. Mark each area green, amber or red: green means you can explain it without notes, amber means you need a prompt, and red means you could not yet plan or evaluate the investigation.

Monthly review

Choose one practical from each science you study, or rotate through the practicals if you take one subject. Cover your notes and answer five prompts: What is the aim? What changes? What is measured? What is the main risk? How would you improve the method? Follow this with one data-analysis question under timed conditions.

At the end of a topic

Complete an unfamiliar practical question using your specification vocabulary. Mark it carefully and add any missed command words to your tracker, such as “describe”, “explain”, “suggest”, “determine” or “evaluate”. Review the relevant practical again if your difficulty was caused by a missing concept rather than weak exam technique.

Before mock and final exams

Prioritise red and amber items. Mix subjects and practical types so that you practise transferring the same skills to unfamiliar contexts. Use past-paper questions and mark schemes, but write down why an answer earned its marks instead of memorising one model response. The topic mastery tracker approach can be adapted for A-Level practical skills, while the mark-scheme review method is useful for analysing data questions at any level.

How to interpret changes

Your tracker should show more than whether a practical has been completed. Look for patterns in performance. If you repeatedly lose marks on variables, practise planning investigations. If your method is sound but your calculations are weak, create a short calculation set using rates, percentages, gradients and uncertainty. If you understand the science but struggle with unfamiliar wording, focus on timed questions and command words.

Separate knowledge problems from execution problems. A knowledge problem means you cannot explain the principle or purpose of a step. An execution problem means you know what to do but make errors in units, significant figures, graph scales or written clarity. They require different actions: revisit teaching material for the first, and complete carefully marked practice for the second.

Do not treat every unusual result as an anomaly. First check the readings, units and calculation. Then consider whether the point lies away from the overall pattern and whether there is a defensible experimental reason. In an exam, state the evidence for calling a result anomalous and explain what you would do next.

For practical endorsement activities, completion and teacher assessment may be handled through your school or college. Keep your own learning tracker separate from any formal record, and ask your teacher which activities, skills and evidence you are expected to maintain.

When to revisit

Revisit this guide and your tracker at least monthly during teaching, after each new practical, before mock exams and during final revision. Update the checklist whenever your school changes the order of practical work or your exam board publishes a specification amendment. At the start of each academic year, confirm the qualification code, exam board and current specification rather than relying on an older revision guide.

Use this final action plan:

  1. Write your exam board and specification details at the top of your practicals tracker.
  2. List every required practical or practical skill and leave space for a confidence rating.
  3. Complete one entry after each laboratory session.
  4. Schedule a monthly mixed review using one planning question and one data question.
  5. Turn every repeated error into a specific task for your next study session.
  6. Before an exam, practise unfamiliar scenarios rather than only recalling familiar experiment names.

For targeted support, a science tutor can help you diagnose whether marks are being lost through scientific knowledge, practical reasoning or exam technique. The aim is not to memorise a laboratory script; it is to recognise the skill being tested and apply it accurately to new evidence.

Related Topics

#A-Level#Biology#Chemistry#Physics#Required Practicals#Revision Systems#Exam Technique
T

The Tutors UK Editorial Team

Education Editor

Senior editor and content strategist. Writing about technology, design, and the future of digital media. Follow along for deep dives into the industry's moving parts.